Review: Marathon Technologies' cluster application provides IT managers with a low-hassle means of bolstering Windows Server 2003 uptime.
Marathon Technologies EverRun HA offers companies a relatively easy way to bolster the uptime of their Windows Server 2003 applications.
EverRun HA (high availability) serves up a virtualized Microsoft Windows Server 2003 environment from a linked pair of Windows Server 2003 systems, which Marathon calls CoServers.
In each pair, a primary CoServer hosts the virtual server instance while the secondary server stands by, prepared to take over automatically, in case of hardware failure or on command.
The great thing about the EverRun HA approach is that the virtual server runs a regular copy of Windows Server 2003, so applications install normally and dont require any special modifications.
eWEEK Labs recommends that companies interested in boosting the availability of applications served from Windows Server 2003 systems look into obtaining an evaluation copy of EverRun HA.
EverRun HA costs $7,500 per system for single-socket servers, $10,000 per server for dual-socket machines and $12,500 for servers with more than two socketsthats in addition, of course, to the costs for the CoServer hardware and for the two Windows Server 2003 licenses.
For users of Windows Server 2003 Enterprise Edition, however, theres no need to shell out for an additional Windows Server license for the virtual server: Thanks to the recent changes in Microsofts Windows Server licensing, as many as four virtual instances of Windows Server can run under an Enterprise Edition host.
EverRun HA runs on Windows Server 2003 Standard Service Pack 1 or Windows Server 2003 Enterprise SP1. The EverRun HA documentation specifies that Windows Server 2003 be installed with SP1 slipstreamed into the installation disk, rather than applied after installing Windows Server.
Business as usual
One of the key selling points for EverRun HA is the fact that it works with regular Windows applications. We installed on our EverRun virtual server the Windows version of the Plone Content Management System. With its Web presentation, database, application server and WebDAV (Web-based Distributed Authoring and Versioning) file store elements, the Plone application provides plenty of interesting targets against which to test EverRun HAs functionality.
EverRun HA requires two servers for use as CoServers, each with two physical processors, two cores or Intels Hyper-Threading functionality. The product needs at least two processors per CoServer because it dedicates one processor to running the virtual server and the other to running the CoServer itself.
Each machine also requires at least 768MB of RAM, a Gigabit Ethernet adapter for keeping in sync with the other CoServer and another Ethernet adapter for a network connection. The machines neednt be identicalbased on their needs and hardware resources, companies can consider deploying the secondary CoServer on slimmer hardware than the primary one, for instance.
Marathon Technologies adds Opteron support to its EverRun line. Click here to read more.
Once we had our two CoServers and the virtual server up and running with Plone installed, we promptly yanked the power cord from the machine wed designated as the pairs primary CoServer. From the EverRun management console running on our secondary system, we then watched to see what would happen.
As advertised, the secondary CoServer immediately recognized the loss of its sibling server and began taking over the virtual server hosting duties. The handoff took a little more than a minute, during which time our test Plone site was inaccessible. Once the handoff was complete, our Plone server was back up and functioning normally, apparently no worse for wear.
When we powered up our downed CoServer and allowed it to boot back up, we couldnt tell from looking at the management console whether the machine was ready to rejoin its partner in the cluster. We had to right-click on the CoServer wed downed and choose to re-enable it, which kicked off a disk-syncing operation in which the virtual disk of the secondary CoServer was copied, block-by-block, back to the primary CoServer. We could watch the progress of the disk copy through the products management console.
After the mirroring operation was complete, the primary CoServer automatically resumed hosting duties for the virtual server.
Pulling the plug on the secondary CoServer had a similar effect, except that we didnt lose our connection to our virtual server and its Plone instance.
We then executed a planned shutdown of the primary CoServer, by first migrating our virtual server to the secondary CoServer from the products management console. Unlike with our plug-pulling stunt, the planned migration occurred without any noticeable downtime of our Plone server.
Microsoft updates its Windows Server road map. Read more here.
Marathon sells a separate, $16,000 product called EverRun FT that not only keeps the server pair data in sync, but also executes code in parallel. If we had been using EverRun FT, there would have been zero downtime in our plug-pulling scenario.
Safe and secure
To apply security updates to our Windows severs, we had to bring one of our CoServers offline, update it, migrate the virtual server to the updated system, and repeat the process for the second CoServer (before updating the Windows instance installed in the virtual server).
We accessed our EverRun HA server trio using Windows remote desktop feature, and we were able to access EverRun HAs management console from either of our CoServers or from the virtual server.
Advanced Technologies Analyst Jason Brooks can be reached at email@example.com.
Check out eWEEK.coms for the latest news, views and analysis on servers, switches and networking protocols for the enterprise and small businesses.