Lantronix hosted the DSM and shipped me two DSCes. I logged into the DSM over the Internet. This can be done via http or https, but in my case only http was enabled, so I used that even though it seems silly to even offer the option of being able to access the entire control center of the secure remote access solution via a non-encrypted channel. I quickly and easily configured one DSC to be at the branch office and one to be at the data center, and then saved these configuration bootstraps to a USB key. Although the process was very easy, it could have been easier. At times the management GUI is confusing (after configuring settings, click "save profile" and then click "cancel" to return to the previous screen). The management GUI can be flaky sometimes. For example there were many times when I was unsure if I was in configure or monitor mode.I returned to my DSM Web console and saw that the two DSCes were now green, indicating that everything was running smoothly. I configured the branch office-or Device Controller-to allow access to a workstation on that LAN, and I configured the data center-or Host Controller-for a VIP address that pointed to that workstation's IP address. I saved the configurations and quickly opened an RDP session on the remote workstation through my newly created tunnel. It worked like a charm. I tried a multitude of devices, ranging from Windows and Linux workstations to test equipment such as the BreakingPoint Systems BP-1K to a CyberPower PDU to an APC NetBotz 420 environmental monitoring system. I used different protocols, such as VNC, RDP, telnet, http, and https to access different devices. Everything worked smoothly, and the VIP address made each device appear as if it were directly connected to my local network. However, I once tried to view streaming video from a closed circuit security camera, and that was pretty much the kiss of death. ManageLinx, with tunneling through the DSM as a proxy, is simply not built to support streaming video. The solution works best in applications where ease of deployment outweighs the need for high throughput. It was designed for remote service monitoring, configuration, and maintenance, not for all-out remote access. Now that I knew what it could do, I started playing around with different network configurations. I found I needed a pretty permissive firewall policy for the DSC to quickly and easily establish contact with the DSM. It all revolves around needing port 22 open. Administrators can configure the devices to use multiple other ports in the hopes of finding one open (and chances are you will). However, there were situations where I had to reconfigure the firewall at the branch office so the likelihood of plug-and-play deployment by a non-technical user at the branch office becomes unlikely. To be fair, using the DSC inside of a properly configured firewall will create a remote access solution that is secure across many layers of the OSI model. In the right circumstances, Lantronix can provide a powerful and comprehensive secure remote device management solution by coupling additional products with ManageLinx. SecureLinx Branch Office Manager is an IP KVM with per-port power management and a built-in 10/100 unmanaged Ethernet switch. SecureLinx Spider is a small KVM-over-IP device that puts console access directly on the LAN with no client software. Deploying a combination of DSCes and SecureLinx products would allow for remote managing of up to several hundred devices from a central location. The trial kit-one DSM and five DSCes-starts at $18,000. Each additional DSC is $1,000. Matthew D. Sarrel is executive director of Sarrel Group, an IT test lab, editorial services, and consulting firm in New York City.
I plugged the DSC's Ethernet cables into two separate networks that were firewalled from each other using moderate security, as is common in a test lab. Then I plugged them in. There was a sequence of flashing lights, which told me to insert the USB containing the bootstrap file, then a sequence of lights indicated that it read the bootstrap and was contacting the DSM. Then the lights turned all green and indicated the system was ready to go. Even if I had been a non-technical user at a branch location, I could handle that.