Interview: Chief Architect Andy Bechtolsheim touts power of the first Galaxy servers and says more models are on the way.
Sun Microsystems Inc. is about to enter the second phase of its push into the competitive industry-standard server space with the rollout on Monday of the first two of its "Galaxy" family of systems
powered by Advanced Micro Devices Inc.s Opteron processor. The first step was establishing a presence in the market, which Sun did with its V20z and V40z systems.
However, the Galaxy servers promise better performance and improved management and cooling capabilities. Overseeing the development of these systems is Andy Bechtolsheim, a Sun co-founder who returned to the company early last year. Bechtolsheim, chief architect and senior vice president of Suns Network Systems Group, spoke recently with eWEEK Senior Editor Jeffrey Burt about the new servers.
Can you talk about what your goals were for these systems when you came back on board with Sun?
From a Sun perspective, what we wanted to achieve was a common system image that would cover all these systems that we were [building]. Were only announcing the first two membersadditional systems will be coming in the future. But the point is, all of these systems are essentially compatible, meaning theyll run the same BIOS, theyll run the same RAID controller, the same fault-management architecture, and this makes it much easier for us to support the range of systems. So we should support 10 different versions of operating systemsfive of them are Linux, we support VMware, Microsoft Windows, of course, and Solaris. All of these had to be [quality assured] and validated against the underlying hardware, and thats just a lot easier if all of these boxes are identical down to the BIOS level.
The real reason we brought all this design activity back in-house instead of trying to find some boxes in Asia was to end up in an architecturally consistent state where we can have one release of Linux, Windows and Solaris that we know works on these machines in any given time and we can add some value in terms of the extra power [and] cooling service processor abilities that we have that are not generally available in Asia.
It was a combination of both adding value and being architecturally consistent. And obviously our customers expect that these systems fully work and work for all these different environments. Its basically a prerequisite for being successful in the market.
Have you accomplished these goals?
Frankly, it took us a little longer to get the first set of boxes out than we would have liked, but we have many more boxes, some in the pipeline. What we really did at Sun was create an engineering process in terms of the whole [quality assurance] kind of environment that will allow us to bring other systems to market fairly swiftly. This is just an investment that Sun hadnt had before and it took us a while to get that set up. But were very happy with the systems themselves. I wouldnt know how to make them any different or any better, given everything we know today. As we look forward, we expect to see even more scalable versions of these products, which Opteron does support, of course, coming out that customers are basically waiting for.
You spoke about the faster Opteronsthanks to the higher power consumptionbut can you elaborate on any other key differentiators between these systems and those of your competitors in this market?
The main differentiation is the higher-power chips, which, unless you design the box for the extra cooling and power, you cant just plug them in. so that is something we think is going to be fairly unique for a while because, again, this chip was done specifically on our request.
In general, people like Opteron because of its performance characteristics, and theyll do whatever they can to deliver high levels of performance. Our choice was to really do this up front on these initial systems.
It is a competitive market, no need to say, and our choice was to focus on performance. Other people try to cram more chips into their power-limited boxes, which also works when you dont get the highest clock rate.
In other interviews, other Sun executives have used the term "radical design" when talking about the Galaxy systems. How would you describe the design? Is it radical?
I wouldnt call it radical. We changed the industrial design so they look really nice and they look radically different than the previous Sun boxes, but radical is an overstatement. Were really catching up here with the enterprise-class from a functionality standpoint, but were also delivering the performance, so I think the combination of the functionality and performance will make us pretty well positioned in the market.
We also see a great roadmap for the Opteron ahead here, going to even higher clock rates and more cores in the future.
Can you talk about the development efforthow many people, how many hours involved?
The total sense of the group that is doing the Opteron systems at Sun is about 250 people now, and theyre doing a total of about a dozen systems that are in development, of which we are announcing three at this particular announcement. So theres many more systems to come, including blade servers, etc., etc. We are obviously leveraging the Opteron design and the QA testing methodology on a wide number of systems and we intend to extend the line both upwards and downwards.
Can you talk about the relationship between AMD and Sun? This was much more than simply a vendor-OEM relationship.
Theres actually more innovation and more investment theyre making on some of the initial systems that were not announcing today.
Those are boxes that are not similar to anything on the market and, again, that gets people excited.
We are very pleased with our relationship with AMD. They have certainly delivered on their commitment, and the high-powered chip is one of the results of that collaboration. We are closely engaged with them on future systems development as well, but we have no complaints whatsoever with AMD as a supplier to Sun.
Opteron systems expand Suns market.