Openfiler Simplifies Linux NAS, SAN

 
 
By Steven Vaughan-Nichols  |  Posted 2006-09-20
 
 
 
We tend to think of Linux as a general-purpose operating system, but it also makes a great foundation for special-purpose software appliances.

One of the more interesting releases, in this regard, is the storage management operating system, Openfiler.

Xinit Systems Openfiler is designed from the bottom up as both a file-based NAS (network-attached storage) and block-based SAN (storage area network) system manager.

To connect these together, Openfiler is designed for use with iSCSI (Internet SCSI) devices.

Click here to read about a low-cost Linux-based NAS gateway from Coraid.

Basically, iSCSI involves the use of standard SCSI drive commands over a TCP/IP connection.

Typically, this means that the SCSI initiator (typically, a server) accesses remote drives as block devices over Gigabit or 10 Gigabit Ethernet.

From a users viewpoint, it appears that these remote drives are co-located with the server.

This, in turn, gives businesses relatively inexpensive access to terabytes of storage without the expense of Fibre Channel SANs.

Read the full story on Linux-Watch: Openfiler Simplifies Linux NAS and SAN

Check out eWEEK.coms for the latest open-source news, reviews and analysis.

Rocket Fuel