10 Things You Should Know About 802.11n - See More Slide Shows Like This One!

 
 
By Andrew Garcia  |  Posted 2007-10-23
 
 
 

10 Things You Should Know About 802.11n

802.11n can operate in either the 2.4GHz or 5GHz band-conferring more deployment flexibility by allowing implementers to get away from common sources of interference. IT buyers should be aware that almost all 802.11n clients based on CardBus or Expre

10 Things You Should Know About 802.11n

10 Things You Should Know About 802.11n - 40MHz Channels

802.11n can operate using the standard 20MHz channels or with wide 40MHz channels that confer higher top-end throughput. Draft 2.0 of the specification recommends that 40MHz channels only be used in the 5GHz band-but many implementations will allow c

10 Things You Should Know About 802.11n - 40MHz Channels

10 Things You Should Know About 802.11n - MIMO

A key component of 802.11n, MIMO (multiple input, multiple output) uses spatial multiplexing to simultaneously transmit different chains of information at the same time on the same channel, leveraging multipath reflection to make sure everything gets to i

10 Things You Should Know About 802.11n - MIMO

10 Things You Should Know About 802.11n - Antennas

The most common antenna configurations currently are either three by three or two by three transmit/receive chains, but 802.11n will have plenty more options over time. Vendors will explore both the low end (single transmit/dual receive) for the budget-co

10 Things You Should Know About 802.11n - Antennas

10 Things You Should Know About 802.11n - Power over Ethernet

The current POE standard, 802.3af, may not supply enough juice to power access points with 3x3 or greater antenna configurations. A new POE standard, 802.3at, is in the works, but in the meantime administrators may need to get creative with the number of

10 Things You Should Know About 802.11n - Power over Ethernet

10 Things You Should Know About 802.11n - Network Drop

With possible top-end wireless throughput in excess of 100M bps, wireless implementers need to look at upgrading the access points wired network connection to Gigabit Ethernet. Although this is probably not necessary immediately, growing usage of the wir

10 Things You Should Know About 802.11n - Network Drop

10 Things You Should Know About 802.11n - Network Aggregation

With each access points wireless link capable of pushing over 100M bps and a new Gigabit Ethernet infrastructure, the traffic bottleneck may move to the wireless controller. Wireless switches that perform traffic decryption or are otherwise in the middle

10 Things You Should Know About 802.11n - Network Aggregation

10 Things You Should Know About 802.11n - Backward-Compatibility

802.11n is designed to be backward-compatible with both 802.11b/g in the 2.4GHz band and 802.11a in the 5GHz band. For a long time to come, the majority of wireless clients on an 802.11n network will be legacy devices, so administrators must continue to p

10 Things You Should Know About 802.11n - Backward-Compatibility

10 Things You Should Know About 802.11n - Wi-Fi Cell Shape

While the traditional wireless LAN cell shape is roughly spherical (sans obstructions), MIMO and spatial multiplexing will make 802.11n cells spiky and less predictable depending on environmental factors. This may render traditional site sur

10 Things You Should Know About 802.11n - Wi-Fi Cell Shape

10 Things You Should Know About 802.11n - Wi-Fi Alliance

In summer 2007, the Wi-Fi Alliance started certifying devices for compliance with Version 2.0 of the 802.11n draft specification-essentially giving vendors (and customers) the go-ahead to start actively selling, or at least investigating, the technol

10 Things You Should Know About 802.11n - Wi-Fi Alliance

10 Things You Should Know About 802.11n - See More Slide Shows Like This One!

  • 10 Things You Should Know About Open Source
  • 10 Things You Should Know About PCI Compliance
  • 10 Things You Should Know About 802.11n - See More Slide Shows Like This One!

    Rocket Fuel