VMware vCenter Client for iPad Is Only Eye Candy
The VMware vSphere Client for iPad is disappointing. Although the slick Apple iPad interface shows the promise of power, the vSphere Client for iPad will need to bulk up on the information that IT administrators need before the iPad application will be anything more than eye candy.
Missing from this first release are alarms, the ability to browse data stores or detailed data-center statistics and anything other than a rudimentary ability to put ESX hosts into maintenance mode for a reboot. Further, the vSphere Client for iPad relies on the "provided-as-is" vCenter Mobile Access technology, which is still in technical preview and depends on community technical support.
Compared with VMware's just-released, also free and very useful VMware View Client for iPad, the VIC is clearly a half-hearted development. As released, the VMware vSphere Client for iPad is, at best, a simple monitor, not a tool for managing a VMware data center.
VMware vSphere Client for iPad was released March 21 through the Apple App Store.
So What Can It Do?
The VMware vSphere Client for iPad connected to my vCenter server via a virtual appliance from VMware that provides vCenter Mobile Access technologies. After making the connection, I logged in as I would from a vCenter standard desktop client and was presented with a view of my data center, including my ESX host systems.
I tapped on the host system and saw a view of the CPU and memory use, along with details about the ESX physical host and tiles representing the virtual machines. I was able to see a count of the total number of virtual machines, as well as which machines were on and which were off.
If a VM was powered on, I could tap a heartbeat icon that would "flip" the tile to reveal basic system information including CPU, memory, disk and network use for that VM. The tile displayed use data as a trace graph.
When I tapped on the VM tile itself, a new view slid into place revealing details about the system. I was able to see which operating system was installed, as well as the most recently reported amount of CPU and memory the VM used.
The client also reported the IP address, basic status of the VM (green, yellow or red), and whether VMware tools were installed on the system. One of the only things that is improved in the VMware vSphere Client for iPad over the standard desktop client is the VM summary. I could easily see at a glance the snapshot history and comments as well as the latest events reported for the VM.
There are three icons along the bottom of nearly every screen in the VMware vSphere Client for iPad: info, performance and tools. Tapping the info icon generally showed an overview summary of resources the ESX physical host used or, if an individual VM was selected, the basic system details of that machine.
Tapping on the performance icon revealed a detailed usage screen that showed the amount of CPU, memory, disk and network bandwidth on a trace graph that showed nearly current reported data along with a view of recent activity.
The tools icon is a handy addition to the VMware vSphere Client for iPad. There are just two tools: ping and trace route. It was easy to use these basic network-diagnostic utilities to ping the selected machine and run a trace route to that system. While no other tools are currently provided with the VMware vSphere Client for iPad, these two should suffice for basic network troubleshooting and to answer the basic questions about whether an ESX host or VM is reachable on the network.